weberfloor 4690N Marine Combi
weberfloor 4690N Marine Combi
weberfloor 4690N Marine Combi is a polymer modified, dust reduced (low dust), non-sag smoothing compound with paste consistency for use as a fine smoothing and slope building material on steel-, galvanised steel- and aluminium decks for layer thicknesses between 0,5 and 50 mm.
Packaging
- 15 kg bag
weberfloor 4690N Marine Combi is a polymer modified, dust reduced (low dust), non-sag smoothing compound with paste consistency for use as a fine smoothing and slope building material on steel-, galvanized steel- and aluminum decks for layer thicknesses between 0,5 and 50 mm. weberfloor 4690N contains low alkaline alumina cement. The consistency of the compound can be varied with the water addition. Grain size < 0,5 mm.
weberfloor 4690N Marine Combi is designed for use in marine and offshore installations in light traffic areas, mainly foot traffic, as an underlayment for floor coverings such as PVC, vinyl, linoleum, stone and ceramics, carpets etc. weberfloor 4690N is a combination material that is suitable for building slopes, the forming of inclines and coves, ramps, as well as for use as a fine smoothing compound inside. It is also suitable for filling of recesses and holes, and joint filling. The product should not be used in a humid environment over 95% RH. Any special requirements for the floor covering concerned should be observed, comply with the requirements from the floor covering manufacturer. When the smoothed floor has hardened, and been rubbed down where necessary, it will provide a finished sub-floor for most types of floor covering.
| Estimated consumption | 1,55 kg/mm/m² |
| Layer thickness | 0,5-50 mm |
| Drying time before foot traffic | 30-60 minutes |
| Compressive strength | 34 N/mm² (MPa) |
| Flexural strenght | 9 N/mm² (MPa) |
| Fire class | A2fl-s1 A1301 Primary deck covering, Marine EN 13501-1, IMO FTPC Part 6 and IMO FTPC Annex 2, section 2.2 |
See datasheet for more product spesifications.
- Dust reduced, which reduces the dust by handling and mixing the product and thereby improves the work environment
- Rapid drying and fast setting
- Do not sag