weberfloor 4760N epoxy primer
weberfloor 4760N epoxy primer
weberfloor 4760N epoxy primer is a solvent-free, 2-component epoxy resin. The material is highly moisture tolerant. It humidifies matt-damp surfaces, blocks water, and leads to excellent adhesion. In combination with degreaser oily substrates can be cleaned. Afterwards a base coat can be applied.
Packaging
- Hobbock-Combi 30 kg
weberfloor 4760N epoxy primer is a solvent-free, 2-component epoxy resin. The material is highly moisture tolerant.
weberfloor 4760N epoxy primer humidifies matt-damp surfaces, blocks water, and leads to excellent adhesion.
In combination with degreaser oily substrates can be cleaned. Afterwards a base coat can be applied.
Because of the very good penetration capability and high wettability properties the material stands the test on critical substrate. The material offers increased adhesive strength for substrate with lacking solidity. Because of its medium viscosity the material is suitable for scratch coats and as a wet bonding course for bonded screed. Good adhesion on steel-, galvanized steel-, aluminum- and concrete substrates.
- Use as base coat before coating pale-damp and chemically wet-cleaned substrate.
- Use as base coat on screed- and concrete substrate.
- Use as base coat on steel, galvanized steel, aluminum.
- Reinforcement for substrate with insufficient rigidity.
- Scratch-coat for sealing and levelling
| Estimated consumption | Base coat: Approx. 0.35 kg/m² Scratch coat: Approx. 0.4 - 0.6 kg/m² Mortar: Approx. 0.150 - 0.300 kg/m² for each mm of layer |
| Curing time for mechanical load | 2 - 3 days hours at 20 °C |
| Curing time for chemical resistance | 7 days at 20 °C |
| Compressive strength | > 70 N/mm² |
| Flexural strenght | > 25 N/mm² |
See datasheet for more product spesifications.
- Solvent-free
- Cures even on damp substrate
- Low-emission quality
- Easy to apply
- Very excellent adhesion
- High penetration
- Reinforcing