weberfloor 4769N epoxy mortar resin
weberfloor 4769N epoxy mortar resin
The epoxy resin binding agent is slow hardening, easy to process, and gives a sufficient installation time and smoothness for the mortar works.
Packaging
- Hobbock-Combi 30 kg
weberfloor 4769N epoxy mortar resin is a low-viscosity, low-emission 2-components epoxy resin, which is used mainly to install epoxy resin mortar coatings in natural (and coloured) sand.
The epoxy resin binding agent is slow hardening, easy to process, and gives a sufficient installation time and smoothness for the mortar works.
weberfloor 4769N epoxy mortar resin can be usually mixed with natural (and coloured) sands in a mixing ratio of 1 : 8 to 1 : 12 and can be applied easily by hand or mechanically.
weberfloor 4769N epoxy mortar resin is based on the trusted Weber Marine Resin Coating Systems; it corresponds to the new generation of low-emission epoxy resins, and is free of benzyl alcohol, solvents and alkyl phenol. weberfloor 4769N epoxy mortar resin was tested according to AgBB and the DIBt® (German Institute for Structural Engineering) and was accredited for the use in inner areas and recreation rooms. The AgBB Assessment Scheme (AgBB: Committee on Health assessment of construction products) provides special requirements for low-emission construction products, which are used in interior spaces and lounges.
weberfloor 4769N epoxy mortar resin coatings are characterized by a high mechanical- and a good wear resistance. The resin also offers a good colour stability, but is not completely color-stable like all epoxy resins.
The resin offers a good resistance to chemicals, especially saline solutions, diluted inorganic acids and alkalis, as well as solvents. Conditionally resistant to organic acids and strongly oxidizing agents.
The temperature resistance of terrazzo and industrial mortar coatings, in a layer thickness of 6 mm, with moist heat can go briefly up to approx. 80 °C, and, with dry heat, to approx. 120 °C. For a longer exposure or a more intense heating of the floor, seek advice.
- Mortar coatings made of natural (and decorative sand).
- Preferably, for predominantly productions in galleys, laundries, wet areas, different industries (pharmaceuticals, food, machinery, auto-motive and many more), decorative exhibition areas, and museums. For constant wet and chemically contaminated surfaces seek advice.
- Manually and mechanically applied levelled mortar coatings in a thickness range of 5 - 50 mm.
- Levelling coats or base coats and underneath mortar coatings.
| Estimated consumption | Base coat: Approx. 0.300 - 0.400 kg/m² Mortar coating: Mixture 1 : 8 resin approx. 1.35 kg/m² for a 6 mm layer thickness Mixture 1 : 10 resin approx. 1.10 kg/m² for a 6 mm layer thickness Mixture 1 : 12 resin approx. 1.00 kg/m² for a 6 mm layer thickness |
| Curing time for mechanical load | 2 - 3 days for at 20 °C |
| Curing time for chemical resistance | Approx. 7 days at 20 °C |
| Compressive strength | 70 N/mm² |
| Flexural strenght | 30 N/mm² |
See datasheet for more product spesifications.
- For smoothed mortar coatings 5 - 50 mm
- Low-emission
- All-purpose and reliable
- Only slightly yellowing