weber flex fix - tile adhesive
weber flex fix - tile adhesive
weber Flex Fix is a white, low-dust lightweight adhesive with high flexibility, designed for tile installation on demanding substrates with a risk of movement. It can also be used as an adhesive for fixing boards and other building materials. Complies with class C2ES2 according to EN 12004 for optimal performance and reliability.
Tested and certified according to the IMO 2010 FTP Code Part 5 as part of System weber WX - MEDB0000790 / MERB0000790 & System weber fix MEDB000078Z / MERB000078Z.
Packaging
- 15 kg bag
- Flexible lightweight adhesive
- Used for tiling most types of ceramics.
- Low dust for improved working conditions
- Suitable for substrates with movement
- Can be used on both absorbent/non-absorbent surfaces in wet and dry rooms.
- For indoor and outdoor use on walls and floors.
- Excellent for use with electric or water-borne underfloor heating.
Class C2ES2 according to EN 12004
When using floors with underfloor heating, the heating must be switched off at least two days before laying the tiles.
The underfloor heating should not be switched on until at least one week after the floor has been grouted.
NB: Newly poured floors may require a longer curing time. The heat can then be gradually increased.
| Material consumption | Consumption kg/m2 for different dimensions of notched trowel: - 6 mm; Approx. 2,0 kg - 8 mm; Approx. 3,0 kg - 10 mm; Approx. 4,5 kg |
| Water content mixture | Approx. 4,2 ltr/15 kg (= ca. 0,27 ltr/kg) |
| Application temperature | +10°C to +30°C |
| Pot life (Operating time) | Approx. 2 hours after adding water. |
| Cure time before grouting | 24 hours (48 hours for non-absorbent tiles) |
| Curing time before walk-on load | Approx. 2 days (T=23°C, RF=50%) |
| Curing time before full load | Approx. 2 weeks (T=23°C, RF=50%) |
| Adhesion strenght 28 days | > 1,0 N/mm² (EN 1348) |
| Shelf-life | 24 months from production date in unopened packaging under dry conditions. |
| Packaging | Plastic bag á 15 kg, full pallet á 48 bags |
| Certificates | CE, M1, IMO 2010 FTP Code Part 5 |
See datasheet for more product spesifications.
- Flexible lightweight adhesive
- Low dust for improved working conditions
- Suitable for substrates with movement
- Can be used as an installation adhesive
- C2TES2 according to EN 12004
- MED & UK MER certified according IMO FTP Code Part 5 - Primary deck coverings
